Accessories

Solerpool Solar Collector

The Solar Collector is assembled inside the factory. It is manufactured according to your personal dimensions (length and width) and delivered through spools weighing less than 110 lb (50 kg). You only have to unroll it as a carpet and join the solar tubes (there are integrated joins). It can be delivered under the guise of a separate solar tubes circuit (entrance and exit at both ends of the length) or under the guise of a combined solar tubes circuit (entrance and exit at the same end)

Download information

Link Kit (version A or version B)

The Link Kit includes :
- Solar Tubes Caps.
- Collector Hose Connexions.
- Hose nozzles to glue to your plumbing
- Two shut-off valves to stick
- A one-way valve (version A only)
- A vacuum breaking valve (version A only , to place at the end of the collector, at the highest instalation point).
- Glue.
- A repair kit.

Circulation Pump

The Circulation Pump is used to circulate the pool water through the Collector. It is usually controlled by a Sun Sensor or a Solar controller with digital display.

Repair kit

The Collector is able to resist to normal atmospheric conditions. However it can be damaged due to an external factor such as sharp objects. In this case, refit will be very easy using the Repair Kit.

Self Adhesive Mastic

Thanks to the Self Adhesive Mastic you can set up the Collector on an angled roof (steel, tile, slate or corrugated roof). Every 3.3 ft (1 m) or 1.65 ft (50 cm) in the case of a pitch roof. It is delivered in a 6.5 yd (6 m) spool.

Fixing Clips

The Fixing Clips are studied to fix the Collector on a concrete pavement. They are perfectly adapted to the collector shape and can maintain it without any damage. Also available : nail clips for a wooden structure.

Sun Sensor

The Sun Sensor is a simple and cheap solar control. It connects the circulation pump when the rays of the sun are strong enough.

Solar Controller with Digital Display

The Solar Controller with Digital Display is an accurate and performing system. It ensures the maximum solar energy collection by activating the circulation pump when the Collector temperature is at the required level. It is also possible to control the pool water temperature. It is delivered with two temperature sensors and their thermometric wells.

Box to Protect and Power the Pump

The pre-wired box to protect and to power of the circulation pump includes a circuit breaker, a 30 mA differential protection and a pump control switch . It can be activated by the Sun Sensor or by the Solar Control with Digital Display.

Solar Collector for Above–Ground Pools

A cheap solar collector specially designed for above-ground pools; assembled in the factory, you only have to unroll the tubes near the pool. Measurements are standard : length : 5.5 yd (5 m) - width : 1.1 yd (1 m). No control system is necessary. You only have to connect it in series behind the filtration system and connect it manually when the sun is shining.

Option : Black Joining Tubes

You can choose black joining instead of the standard white ones, although this is marginally more expensive.